Cables - MTS Components

MTS Core Cables
Function	Name	Description	Length	Part #	Port
* These cables are used as a pair and connect using a quick-disconnect connection. This allows connections to be broken when donning/doffing the tactical vest/plate carrier or assault pack. † Cable only
Input Devices	UTD Extension Cable*	Extension cable from the TMC to the front of the vest providing a 90° quick disconnect to the UTD cable. Intended for routing in the cummerbund.	28 in.	CB-0127-01	J5

	UTD Cable*	Cable for connecting the UTD to the UTD Extension Cable (CB-0127-01) or UTD Assault Pack Cable (CB-0201-00).	27 in.	CB-0129-00	Q.D.

	UTD Cable	Cable for connecting the UTD directly to the TMC. Can be used to run the cable over the shoulder.	48 in.	CB-0169-00	J5

	HMD, Tac-Eye Adapter	Adapter cable to connect the Tac-Eye LT HMD into the TMC. Provides quick disconnect on the right shoulder.	10 in.	CB-0110-00	J8

GPS	GPS Module	Commercial GPS module that connects to the TMC and is held on the left shoulder.	8.5 in.	MA-0031	J1
GPS
Peripheral Input	I/O Hub Cable	Cable for connecting the I/O Hub to the TMC. Cable also terminates with the same power port connector located on the TMC for easy recharging using MTS power cables (CB-0121, CB-0122, CB-0123).	24/27 in.	CB-0171-01	J2
Peripheral Input
Power	Battery, LI-145	Used for powering the system on a LI-80 or LI-145 Battery.	17 in.	CB-0121-00	J3

	Battery, BA-5590	Used for powering the system on a BA-5590 or BB-2590 Battery.	17 in.	CB-0122-00	J3/J14

	Power Supply, AC Adapter	Used for powering the system on 110/220V outlet power.	44 in.†	CB-0123-00	J3/J14

Radio Cables
No expensive, failure-prone smart cables required
Function	Name	Description	Length	Part #	Port
* These cables are used as a pair and connect using a quick-disconnect connection. This allows connections to be broken when donning/doffing the tactical vest/plate carrier or assault pack. ‡ TacLink configuration
Data Comms	Man-Pack Radio Extension Cable*	For use when carrying a man-pack radio in a 3-day assault pack. Creates a quick disconnect at the front of the vest. Connects to the AN/PRC-117G or AN/PRC-117F Radio Cables (CB-0182).	28 in.	CB-0180-00	J6/J7

	Radio, AN/PRC-117G*	Connects the AN/PRC-117G Radio to the TMC for KDU operation and data communication. Should be used with the Radio Extension Cable (CB-0180).	41 in.	CB-0182-00	Q.D.

	Radio, AN/PRC-117F*	Connects the AN/PRC-117F Radio to the TMC for data communication. Should be used with the Radio Extension Cable (CB-0180).	41 in.	CB-0128-00	Q.D.

	Radio, AN/PRC-152	Connects the AN/PRC-152 Radio to the TMC for KDU operation and data communication.	35 in.	CB-0181-00	J6/J7

	Radio, AN/PRC-152, TacLink version	Connects the AN/PRC-152 Radio to the TMC (TacLink version) for data communication.	35 in.	CB-0168-00	J9/J10‡

	Radio, RT-1922 (MicroLight)	Connects the MicroLight Radio to the TMC for data communication.	20 in.	CB-0159-00	J6/J7

	Radio, AN/PRC-148 MBITR	Connects the AN/PRC-148 MBITR Radio to the TMC for data communication and KDU operation.	35 in.	CB-0161-00	J6/J7

	Radio, AN/PRC-152 & RT-1922 (MicroLight) Y-Cable	Connects both the AN/PRC-152 Radio and the MicroLight Radio to the TMC (on the same port) for data communication and AN/PRC-152 KDU operation.	24/38 in.	CB-0185-00	J6/J7

	Radio, 7800S-TR	Connects the 7800S-TR Radio to the TMC for data communication.	24 in.	CB-0183-00	J6/J7

Audio	Man-Pack Radio Audio Extension Cable	Connects a headset (or PTT device) and radio to the I/O Hub. For use when carrying a man-pack radio in a 3-day assault pack. Creates a quick disconnect over the shoulder along the pack shoulder strap when interfaced with the Man-Pack Radio Audio Cable (CB-0152).	22/40 in.	CB-0176-00	J12

	Man-Pack Radio Audio	Plugs into the Man-Pack Radio Audio Cable (CB-0176) to connect a radio when carrying in a 3-day assault pack.	41 in.	CB-0152-00	Q.D.

	6-pin Audio Headset	Short adapter cable that plugs into the I/O Hub and terminates with a 6 pin audio connector. Use with any number of headsets for listening to computer audio, doing speech recognition, or speech translation.	12 in.	CB-0173-00	J13

	Hand-Held Radio & 6-pin Headset Audio Y-Cable	Connects a hand-held radio and a headset (or PTT device) to the I/O Hub via the audio port.	22/40 in.	CB-0175-00	J12

Video Down Link (VDL) Device Cables
Function	Name	Description	Length	Part #	Port
Video Capture	VDL, RF-7800T	Connects the RF-7800T video down-link receiver to the TMC.	10 in.	CB-0101-00	J4

	VDL, SIR	Connects the SIR video down-link receiver to the TMC. The SIR is also powered through this connection eliminating the need for a separate battery.	24 in.	CB-0178-00	J4

	VDL, MVR-IV	Connects the MVR-IV video down-link receiver to the TMC.	24 in.	CB-0179-00	J4

Miscellaneous Cables
Function	Name	Description	Length	Part #	Port
‡ TacLink configuration
Accessory Functions	RJ45 Ethernet	Short adapter cable with standard Network jack. Plugs into the VDL port.	8.5 in.	CB-0088-00	J4

	DAGR Adapter	Adapter cable for connecting the DAGR GPS device to the TMC (in place of the MA-0031 commercial GPS module).	35 in.	CB-0136-00	J1

	External Monitor Adapter (VGA, USB)	For use with a standard computer monitor or USB device. Connects to the UTD port.	35 in.	CB-0160-00	J5

	RJ45 Ethernet	Short adapter cable with standard Network jack. Plugs into either radio port.	8 in.	CB-0162-00	J6/J7

	TacLink Adapter	Short adapter cable that plugs into the TMC and creates a standard Taclink connection. Only used with the TMC TacLink version.	34 in.	CB-0163-00	J9/J10‡

	DC Vehicle Adapter	Vehicle power adapter plugs directly into the TMC power port or the I/O Hub Y-Cable (CB-0171).	60 in.	CB-0164-00	J3/J14

	UTD Adapter Cable	Connects to the UTD and terminates to VGA, USB, and a barrel jack for power. Can be used for attaching the UTD to any computer with VGA and USB interfaces running Windows or Linux.	48 in.	CB-0167-00	UTD

	Hard Drive Cable	Adapter cable that plugs into the I/O Hub and provides a mini USB connector for use with a portable hard drive (or any USB device with a mini USB connection).	10 in.	CB-0174-00	J12